Delorean Parts
|
|
|
|
DeLorean Updates and Electrical Modifications
The Fan Fix, Fuse Box,
Pivot shifter bolt, Fan Fail, Hot Start relay
|
New fuel tank closing plate.
Made out of heavy 3/16th aluminum plate.
Comes with as you
can see an industrial grade fiber heat insulation
heat barrier which will keep the tank from touching the shield.
This will lower the temperature of the gas in the tank on those
hot days tank
even more so the gas over heating problem won't play havoc with
your fuel pump.
#101716 $295.00 Add
to Basket
|
Delorean head light switch
saver.
The Head light switch is gone and I understand won't be
remade.
added 08/02/04
Reference.
Due to high current flow through the
head light switch the plastic around the
contact material will melt. The above relay kit will bypass
the contacts in the
switch and run the current through the relay and save the
switch. The only other trouble you may have is the mechanical
mechanism may need cleaning and adjusting. Comes with complete
instruction and no special tools needed.
$19.95 Add to Basket
|
|
|
Don't let the failure of the
fans coming on put you in theheat.
The Fan Fix Dual 2 x 2 .
A new updated
microprocessor on and off.
A fast and simple way
to prevent coolant fan circuit
breakdown and wiring harness stress.
Fan Fix placement. The Fan Fix Dual 2x2.
Almost as small as a pack
of cigarettes
Lifetime
Warranty. Plug and
play. 24/7 Tech support
$149.95 Add to Basket
|
New angle drives for the
speedo.
I have been testing my sample for 6
months and not a problem.
Replaceable shaft. Just pull it out and push another one
in.
Sealed, no greasing required to clog up or over grease.
#106130 $54.95 Add to Basket
|
Speedometer cable lower
Make sure you have updated the lower
cable to try to preserve the angle drive
from locking up. These are shorter than
the old ones with less kink.
#101412 $44.95 Add to Basket
|
Speedometer cable long.
If you don't mind eliminating the
service
counter box you can use this longer cable
to help cut down on one less thing to
cause a problem to the angle drive.
#101412L $89.95 Add to Basket
|
The new and easy way to install a real fuse
box with heavy duty contacts . If you melt this one then you
really have a problem.
Not that OEM 30 year old piece of
!
|
|
Easy to install.
|
New
easy way to install
enlarge to find out.
Delorean
replacement fuse box.
If you buy the same old box, then you get the same old
results. ( melted )
Our box is
300% thicker contact material than
original so less chance to overheat and it grips tighter to
the fuse..
|
Vertical
Reference
Horzontal
reference
|
|
|
|
|
Hot start relay
$19.95
Add to Basket
with Momentary switch.
Now you can leave it
plugged in and push the
switch when it
needs to
be used. Internally fuse
protected for safety.
This
little device will force the
cold start valve to
inject
some gas every time you
start the car, hot or cold.
If
you have a chronic problem
, then try replacing the fuel
accumulator to solve the
starting problem.
Wire removal for
jumper! Only if
you have a
fused Fan Fail
Replacement. Tab
release
for
female connector in socket.
|
 The
Fan Fail Fix
#1.Easy plug
and play fused at
15 Amps
for each
fan.
#2. You now get
light indication
that voltage is
going to the fans.
#3.Believe it or
not, with simple
design you will
get an indication
that one or more fans have failed.
#4.You can see the cycling of the air conditioner if your
low on freon.
#5. In cold climate you can Unplug
one of the fuses have
less air flow
and heat up the car faster and put
less
strain on the power circuit of the
car.$19.95
Add to Basket
Engine Compartment Replacement
light switch. $9.95
Add to Basket
|
Delorean fuse extenders.
Fuse extenders. #7 is the
main one that melts in the
fuse block. $4.50 ea.
Add to Basket
Save
the fuse block,
Made to length, but I would
keep the
wire as long as
possible makes a good heat
sink.
Black wire holder
10 amps or less, orange wire
holder
10 amps up. crimped,
soldered and shrink tubing,
Air Bleeder.
$24.95
Add to Basket
Don't over heat. Install the Air
bleeder and protect the cooling system.
|
Stainless Fuel hose
Hand made
to fit
$189.95
Add to Basket
$100.00 core charge.
I have to have the old hose fittings back.
|
Littlefuse inline fuse holders
$2.50 ea
Add to Basket
Shift linkage pivot bolt.
Try to break this one Proof load strength goes
fromappx.84,00 psi to 135,000 psi. De Lorean came with a 8.8
grade. This is a 12.6 grade
Kit $9.95
Add
to Basket |
ECU Idle Micro switch
Plug and play, No modifications.
$29.95
Add to Basket |
Website
Design and Hosting - XyNexT Internet Strategies